SUCCESS STORIES
Fluid Monitoring System
Problem
A heavy truck repair shop had a poorly installed fluid monitoring system. Connections were made with butt splices and wires were tangled, kinked, and exposed to damage. The installation was hazardous, unsightly, and difficult to troubleshoot when a problem arose.
Solution
Installed a connection box for each fluid panel
Eliminated butt splices and protected all connections inside of the box for easy access
Organized and protected all wires inside spiral wrap
During rewiring process, individual fluid panels were bypassed allowing the customer to continue to dispense oil. All work was completed with no interruption of customer's normal operations.
Customer Benefit
No installation downtime
Improved system reliability, reduced future downtime risk
Eliminated hazard
Facilitated troubleshooting
Quick Lube Drain Rollers
Problem
Old drain pan rollers at a quick lube business were worn out and missing bearings. Roller width was not adjustable, axles were bent, and supports were welded in place preventing easy replacement.
Solution
Fabricated new roller brackets off-site
Cut off old rollers, while leaving old welded brackets in place to save time
Bolted in new brackets (instead of welding due to presence of flammable fluids)
Sealed bolt holes to prevent fluid leakage
Installation performed in all four bays with no interruption to customer's operations
Customer Benefit
No installation downtime
Eliminated failure risk and future downtime
Roller width is adjustable to accommodate varying pit widths